Online Only Auction
Click Main Image For Fullscreen Mode
Final Bid Price Not Displayed
Shipping Not Available
Date(s)
6/28/2016 - 6/30/2016
Auction Notice:

***Please review auction details tab for payment, shipping and removal information***


Information
Lot # 88
Lead Vortex 850R Spare Parts
Description
Lot: (4) Pallets of Spare Parts to Include (22) VORTEX 850R FUJITSU MOTHERBOARD D3313-S23-GS1/D3313-S23-GS2 MFG-000001, (3) VORTEX 850R KINGSTON 4GB 204-PIN DDR3SO-DIMM DDR3 1600 KVR16LS11/4 MFG-000002, (30) VORTEX 850R CHIMEI LCD SCREEN DISPLAY TYPE: G121X1-L03 MFG-000003, (21) VORTEX 850R TOUCH SCREEN PANEL HANTOUCH H3121A-NEOFS52 MFG-000004, (21) VORTEX 850R USB TOUCH SCREEN CONTROLLER SET HANTOUCH HT-EBU4-3-254 MFG-000005, (33) VORTEX 850R LABEL SET A (DBL. SIDED ADHSVW/ WATER RESISTANT COATING) MFG-000006 , (100) VORTEX 850R OPEN HOLE GROMMET, BLACK MFG-000008 , (385) VORTEX 850R WIRE SADDLE - NON LOCKING SNAPIN, ARROWHEAD MOUNTED, NATURAL MFG-000009 , (220) VORTEX 850R CABLE TIE 100X2.5MM MFG-000010 , (83) VORTEX 850R CABLE TIE 281.99 X 4.6mm 7130K15/MFG-000011 , (24) VORTEX 850R PLASTIC CABLE SOCK, BLACK -DIAMETER 25MM 360MM LONG MFG-000012 , (25) VORTEX 850R INSULATOR FOR TOUCH SCREEN(2X255MM & 2X190MM) MFG-000013 , (42) VORTEX 850R M-08 BLACK NETLON NET (FLAME RESISTANT) LARGE MFG-000014 , (25) VORTEX 850R PRE-FILTER G2 VG80 MFG-000015 , (83) VORTEX 850R CIS SENSOR DL100-05EUJS3-O MFG-000016, (136) VORTEX 850R SHRINK TUBE BLACK (DIAMETER 20MM) MFG-000017 , (25) VORTEX 850R FUSE PANEL PCB MFG-000018 , (21) VORTEX 850R USB A-A CABLE/PRINTER (2/Set) MFG-000019 , (25) VORTEX 851R COOLING FAN 24V WITH LONG CABLE MFG-000020 , (23) VORTEX 850R FLAT SERIAL (RS232) CABLE MFG-000024 , (25) VORTEX 850R DOUBLE USB EXTENSION CABLE MFG-000025 , (23) VORTEX 850R POWER SUPPLY CABLE FOR CPU MAIN BOARD MFG-000026 , (21) VORTEX 850R POWER SUPPLY CABLE FOR PRINT ENGINE MFG-000027 , (23) VORTEX 850R POWER SUPPLY CABLE FOR FAX5 UPPCB MFG-000028 , (21) VORTEX 850R USB TOUCH SCREEN CONTROLLER CABLE MFG-000031 , (29) VORTEX 850R GROUND CABLE FOR SIDE DOOR 120MM LONG MFG-000033 , (23) VORTEX 850R GROUND CABLE FOR DISPLAY TOWER 430MM LONG MFG-000034 , (23) VORTEX 850R GROUND CABLE FOR INTERNAL PAPER FEED TRAY MFG-000035 , (23) VORTEX 850R GROUND CABLE BETWEEN INTERNAL PAPER FEED AND CIS COVER MFG-000036 , (27) VORTEX 850R SSD 64 GB MFG-000037 , (43) VORTEX 850R ACTIVE COOLER FOR MINI-ITX D3003/3313 S26361-F5000-C005/S26361-D6000-C300 MFG-000038, (39) VORTEX 850R USB TTL SERIAL CABLE 1000mmLONG MFG-000039 , (34) VORTEX 850R PRINTING AREA POSITION LABEL30x280mm MFG-000041 , (4) VORTEX 850R LVDS CABLE E203950 MFG-000045, (34) VORTEX 850R EXTERNAL USB PORT COVER (SELF-ADHESIVE) 27x52mm MFG-000047 , (8) VORTEX 850R BACKLIGHT (INVERTER) CABLE MFG-000049 , (29) VORTEX 850R GROUND CABLE FOR BACK COVER PANEL 300mm LONG MFG-000057 , (3) VORTEX 850R POWER SUPPLY CABLE FOR FAN (1050mm) MFG-000058 , (30) VORTEX 850R 2GB USB STICK W/DRIVER INSTALL FILE AND USER MANUAL V851R-USB MFG-000059, (1) VORTEX 850R MICROSOFT WIN 7 STANDARD EMBEDDED LICENSE 7WT-00050 MFG-000060, (23) VORTEX 850R GROUND CABLE FOR FRONT COVER PANEL 220mm LONG MFG-000061 , (25) VORTEX 851R CIS SENSOR CABLE MFG-000062 , (25) VORTEX 851R MAIN POWER SWITCH BUTTON SCHURTER 4304.6058 MFG-000063, (25) VORTEX 850R STARTER CABLE MFG-000064 , (25) VORTEX 850R MINI USB CABLE MFG-000065 , (15) VORTEX 850R DATA CABLE FAX IO FAX CIS MFG-000066 , (25) VORTEX 850R VGA CABLE MFG-000067 , (23) VORTEX 850R SHORT LAN CAT5 PATCH CABLE MFG-000068 , (23) VORTEX 850R LONG LAN CAT5 PATCH CABLE MFG-000069 , (25) VORTEX 850R FAX5 UP SMD PCB FAX5_UP MFG-000070, (25) VORTEX 850R FAX5 IO SMD PCB FAX5_IO MFG-000071, (28) VORTEX 850R FAX5 PC SMD PCB FAX5-PC MFG-000072, (25) VORTEX 850R FAX5 USB SMD PCB FAX5-USB MFG-000073, (4) VORTEX 851R POWER SUPPLY 24V 10A SP-240-24 MFG-000079, (3) VORTEX 850R GROUND CABLE FOR TOP COVER160mm LONG MFG-000080 , (3) VORTEX 850R GROUND CABLE FOR PRINT ENGINE 260mm MFG-000081 , (23) VORTEX 850R PWR & GRND CBL 24V FOR FUSE PANEL 1 RED & 1 BLACK/SET MFG-000082 , (24) VORTEX 850R USB A-B DOWN ANGLE CABLE 1.8m MFG-000083 , (32) VORTEX 850R SIDE PLATE LOGO (SMALL) 850R SMALL LOGO MFG-000084, (83) VORTEX 850R BULLSEYE BUBBLE GAUGE 10x6mm MFG-000085, (19) VORTEX UNIVERSAL SIDE PLATE LOGO(LARGE) LARGE LOGO MFG-000086, (42) VORTEX 850R CABLE HOLDER 1/4x9/16" ADHESIVE BLACK 7565K65 MFG-000087, (1200) VORTEX 850R HEAT SHRINK TUBING (BLACK) 100FT 7856K35 MFG-000088, (19) VORTEX 850R 4P DIN FEMALE DC SOCKET KPJX-PM-4S-S MFG-000107, (12) VORTEX 850S INK CYAN 250ml CARTRIDGE VOR-000037 , (12) VORTEX 850S INK MAGENTA 250ml CARTRIDGE VOR-000038 , (1) VORTEX 850S INK YELLOW 250ml CARTRIDGE VOR-000039 , (9) VORTEX 850S INK BLACK 250ml CARTRIDGE VOR-000040 , (7) VORTEX 850R PRINTHEAD VOR-000041 , (7) VORTEX 850R ASSY LIFTER MOTOR WITH COVER VOR-000054 , (12) VORTEX 850R ASSY SLED (MAINTENANCE MODULE COMPLETE) VOR-000055 , (14) VORTEX 850R CUTTER ASSEMBLY MODULE VOR-000056 , (45) VORTEX 850R GEAR CAM LIFT (PLASTIC LIFTER MOTOR GEAR) VOR-000057 , (60) VORTEX 850R ROCKER ARM LIFT LEFT VOR-000058 , (50) VORTEX 850R ROCKER ARM LIFT RIGHT VOR-000059 , (34) VORTEX 850R SENSOR SLED PCA VOR-000060 , (18) VORTEX 850R ASSY WIPER ROLLER (MICROFIBRE ROLLER) VOR-000080 , (9) VORTEX 850R ASSY MODULE WIPER TRANSFER (WITH MUDFLAP) VOR-000089 , (8) VORTEX 850R BUSHING SLED COMBINED VOR-000090 , (8) VORTEX 850R GEAR SHAFT SLED DRIVE VOR-000091 , (12) VORTEX 850R LEVER LATCH (PLASTIC PH COVER) VOR-000092 , (27) VORTEX 850R ROCKER ARM LIFT SPRING VOR-000093 , (10) VORTEX 850R DEDIPROG CABLE VOR-000094 , (1) VORTEX 850R ABSORBER WASTE INK VOR-000100 , (9) VORTEX 850R TTL CABLE VOR-000103 , (41) VORTEX 850R ASSY BUFFER AND VENT BOX VOR-000128 , (1) VORTEX 850R ASSY DOCK FLUIDIC PUMP SIDE VOR-000129 , (9) VORTEX 850R ASSY DOCK FLUIDIC VALVE SIDE VOR-000130 , (1) VORTEX 850R ASSY DPCA WITH HEAT SINK VOR-000131 , (1) VORTEX 850R ASSY DPCA WITH HOLDER VOR-000132 , (2) VORTEX 850R ASSY GRIT SHAFT PRIMARY VOR-000134 , (5) VORTEX 850R ASSY LATCH PLASTIC CMKKY(SET OF CK+MK+Y) VOR-000135 , (3) VORTEX 850R ASSY MODULE PLATEN PRINT VOR-000139 , (2) VORTEX 850R ASSY MOTOR STEPPER SLED VOR-000141 , (1) VORTEX 850R ASSY PLATEN EXIT UPPER (STAR WHEEL ASSY) VOR-000142 , (5) VORTEX 850R ASSY PLATEN MAIN UPPER VOR-000143 , (5) VORTEX 850R ASSY WIPER MOTOR CONNECTOR PCA VOR-000147 , (6) VORTEX 850R CODE WHEEL MAIN MEDIA DRIVE VOR-000150 , (1) VORTEX 850R GEAR, COMPOUND 12TX34T VOR-000151 , (16) VORTEX 850R GEAR, COMPOUND 12TX48T VOR-000152 , (1) VORTEX 850R IDS REPLACEMENT KIT VOR-000153 , (5) VORTEX 850R LEVER LATCH SPRING (PH COVER) VOR-000154 , (15) VORTEX 850R PCA INK TANK INTERFACE VOR-000156 , (5) VORTEX 850R PCA INK TANK INTERFACE TEMP SENSOR VOR-000157 , (5) VORTEX 850R PCA INK TANK LEVEL VOR-000158 , (5) VORTEX 850R PCA K1 INK TANK INTERFACE VOR-000159 , (5) VORTEX 850R PCA PEN DRIVER VOR-000160 , (4) VORTEX 850R PULLEY DRIVE SHAFT MAIN VOR-000162 , (2) VORTEX 850R ROCKER ARM LIFT E-RING VOR-000163 , (10) VORTEX 850R SENSOR ENCODER PCA VOR-000164 , (6) VORTEX 850R SENSOR ENTRY PCA VOR-000165 , (7) VORTEX 850R SENSOR EXIT PCA VOR-000166 , (11) VORTEX 850R SENSOR LABEL WEB IRTX PCA VOR-000167 , (5) VORTEX 850R SPRING, ENCODER MODULE VOR-000168 , (21) VORTEX 850R WIPER MOTOR FLEX CABLE VOR-000169 , (1) VORTEX 850R DOUBLE USB CABLE FOR IXBDN MOTHERBOARD VOR-000181 , (1) VORTEX 850R DOUBLE USB CABLE FOR MX525DC MOTHERBOARD VOR-000192 , (1) VORTEX 850R SSD 32 GB FOR MX525DC MOTHERBOARD VOR-000204 , (2) VORTEX 850R SSD WITH IMAGE FILE FOR IXBDN MOTHERBOARD VOR-000330 , (1) VORTEX 851R BRACKET MOTOR SLED DRIVE VOR-000350 , (1) VORTEX 850S OVERLAY BADGE VOR-000358 (1) VORTEX 850R GEAR SHAFT SLED ASSEMBLY VOR-000361 , (34) VORTEX 850R POWER CORD FOR N. AMERICA VOR-000362 , (46) VORTEX 850R POWER CORD FOR EU VOR-000368 , (4) VORTEX 850R CODE WHEEL MAIN MEDIA DRIVE ASSEMBLY VOR-000374 , (3) VORTEX 850R UNWINDER CIRCUIT BOARD VOR-000410 , (1) VORTEX 850R BASE RIP VOR-000416 , (9) VORTEX 850R BASE SERVER ENTRY LEVEL LINUX BASED VOR-000417 , (1) VORTEX 850R SSD WITH IMAGE FILE FOR FUJITSU MOTHERBOARD VOR-000420 , (1) VORTEX 850R FUSE, 0.125A 250V, TIME LAG, CARTRIDGE 5x20mm, GLASS 10/PKG VOR-000421 , (1) VORTEX 850R FUSE, 1.0A 250V, TIME LAG, CARTRIDGE 5x20mm, GLASS 10/PKG VOR-000422 , (1) VORTEX 850R FUSE, 3.15A 250V, TIME LAG, CARTRIDGE 5x20mm, GLASS 10/PKG VOR-000423 , (1) VORTEX 850R FUSE, 5.0A 250V, TIME LAG, CARTRIDGE 5x20mm, GLASS 10/PKG VOR-000424 , (1) VORTEX 850R FUSE, 6.3A 250V, TIME LAG, CARTRIDGE 5x20mm, GLASS 10/PKG VOR-000425 VOR-000425, (22) VORTEX 850R FUJITSU MOTHERBOARD D3313-S23-GS1/D3313-S23-GS2 MFG-000001, (3) VORTEX 850R KINGSTON 4GB 204-PIN DDR3SO-DIMM DDR3 1600 KVR16LS11/4 MFG-000002, (30) VORTEX 850R CHIMEI LCD SCREEN DISPLAY TYPE: G121X1-L03 MFG-000003, (21) VORTEX 850R TOUCH SCREEN PANEL HANTOUCH H3121A-NEOFS52 MFG-000004, (21) VORTEX 850R USB TOUCH SCREEN CONTROLLER SET HANDTOUCH HT-EBU4-3-254 MFG-000005, (33) VORTEX 850R LABEL SET A (DBL. SIDED ADHSVW/ WATER RESISTANT COATING) MFG-000006 , (100) VORTEX 850R OPEN HOLE GROMMET, BLACK MFG-000008 , (385) VORTEX 850R WIRE SADDLE - NON LOCKING SNAPIN, ARROWHEAD MOUNTED, NATURAL MFG-000009 , (220) VORTEX 850R CABLE TIE 100X2.5MM MFG-000010 , (83) VORTEX 850R CABLE TIE 281.99 X 4.6mm 7130K15/MFG-000011 , (24) VORTEX 850R PLASTIC CABLE SOCK, BLACK -DIAMETER 25MM 360MM LONG MFG-000012 , (25) VORTEX 850R INSULATOR FOR TOUCH SCREEN (2X255MM & 2X190MM) MFG-000013 , (42) VORTEX 850R M-08 BLACK NETLON NET (FLAME RESISTANT) LARGE MFG-000014 , (25) VORTEX 850R PRE-FILTER G2 VG80 MFG-000015 , (83) VORTEX 850R CIS SENSOR DL100-05EUJS3-O MFG-000016, (136) VORTEX 850R SHRINK TUBE BLACK (DIAMETER 20MM) MFG-000017 , (25) VORTEX 850R FUSE PANEL PCB MFG-000018 , (21) VORTEX 850R USB A-A CABLE/PRINTER (2/Set) MFG-000019 , (25) VORTEX 851R COOLING FAN 24V WITH LONGCABLE MFG-000020 , (23) VORTEX 850R FLAT SERIAL (RS232) CABLE MFG-000024 , (25) VORTEX 850R DOUBLE USB EXTENSION CABLE MFG-000025 , (23) VORTEX 850R POWER SUPPLY CABLE FOR CPU MAIN BOARD MFG-000026 , (21) VORTEX 850R POWER SUPPLY CABLE FOR PRINT ENGINE MFG-000027 , (23) VORTEX 850R POWER SUPPLY CABLE FOR FAX5 UPPCB MFG-000028 , (21) VORTEX 850R USB TOUCH SCREEN CONTROLLER CABLE MFG-000031 , (29) VORTEX 850R GROUND CABLE FOR SIDE DOOR 120MM LONG MFG-000033 , (23) VORTEX 850R GROUND CABLE FOR DISPLAY TOWER 430MM LONG MFG-000034 , (23) VORTEX 850R GROUND CABLE FOR INTERNAL PAPER FEED TRAY MFG-000035 , (23) VORTEX 850R GROUND CABLE BETWEEN INTERNAL PAPER FEED AND CIS COVER MFG-000036 , (27) VORTEX 850R SSD 64 GB MFG-000037 , (43) VORTEX 850R ACTIVE COOLER FOR MINI-ITX D3003/3313 S26361-F5000-C005/S26361-D6000-C300 MFG-000038, (39) VORTEX 850R USB TTL SERIAL CABLE 1000mmLONG MFG-000039 , (34) VORTEX 850R PRINTING AREA POSITION LABEL 30x280mm MFG-000041 , (4) VORTEX 850R LVDS CABLE E203950 MFG-000045, (34) VORTEX 850R EXTERNAL USB PORT COVER (SELF-ADHESIVE) 27x52mm MFG-000047 , (8) VORTEX 850R BACKLIGHT (INVERTER) CABLE MFG-000049 , (29) VORTEX 850R GROUND CABLE FOR BACK COVERPANEL 300mm LONG MFG-000057 , (3) VORTEX 850R POWER SUPPLY CABLE FOR FAN (1050mm) MFG-000058 , (30) VORTEX 850R 2GB USB STICK W/DRIVER INSTALL FILE AND USER MANUAL V851R-USB MFG-000059, (1) VORTEX 850R MICROSOFT WIN 7 STANDARD EMBEDDED LICENSE 7WT-00050 MFG-000060, (23) VORTEX 850R GROUND CABLE FOR FRONT COVER PANEL 220mm LONG MFG-000061 , (25) VORTEX 851R CIS SENSOR CABLE MFG-000062 , (25) VORTEX 851R MAIN POWER SWITCH BUTTON SCHURTER 4304.6058 MFG-000063, (25) VORTEX 850R STARTER CABLE MFG-000064 , (25) VORTEX 850R MINI USB CABLE MFG-000065 , (15) VORTEX 850R DATA CABLE FAX IO FAX CIS MFG-000066 , (25) VORTEX 850R VGA CABLE MFG-000067 , (23) VORTEX 850R SHORT LAN CAT5 PATCH CABLE MFG-000068 , (23) VORTEX 850R LONG LAN CAT5 PATCH CABLE MFG-000069 , (25) VORTEX 850R FAX5 UP SMD PCB FAX5-UP MFG-000070, (25) VORTEX 850R FAX5 IO SMD PCB FAX5-IO MFG-000071, (28) VORTEX 850R FAX5 PC SMD PCB FAX5-PC MFG-000072, (25) VORTEX 850R FAX5 USB SMD PCB FAX5-USB MFG-000073, (4) VORTEX 851R POWER SUPPLY 24V 10A SP-240-24 MFG-000079, (3) VORTEX 850R GROUND CABLE FOR TOP COVER 160mm LONG MFG-000080 , (3) VORTEX 850R GROUND CABLE FOR PRINT ENGINE 260mm MFG-000081 , (23) VORTEX 850R PWR & GRND CBL 24V FOR FUSE PANEL 1 RED & 1 BLACK/SET MFG-000082 , (24) VORTEX 850R USB A-B DOWN ANGLE CABLE 1.8m MFG-000083 , (32) VORTEX 850R SIDE PLATE LOGO (SMALL) 850R SMALL LOGO MFG-000084, (83) VORTEX 850R BULLSEYE BUBBLE GAUGE 10x6mm MFG-000085, (19) VORTEX UNIVERSAL SIDE PLATE LOGO(LARGE) LARGE LOGO MFG-000086, (42) VORTEX 850R CABLE HOLDER 1/4x9/16" ADHESIVE BLACK 7565K65 MFG-000087, (1200) VORTEX 850R HEAT SHRINK TUBING (BLACK)100FT 7856K35 MFG-000088, (19) VORTEX 850R 4P DIN FEMALE DC SOCKET KPJX-PM-4S-S MFG-000107, (12) VORTEX 850S INK CYAN 250ml CARTRIDGE VOR-000037 , (12) VORTEX 850S INK MAGENTA 250ml CARTRIDGE VOR-000038 , (1) VORTEX 850S INK YELLOW 250ml CARTRIDGE VOR-000039 , (9) VORTEX 850S INK BLACK 250ml CARTRIDGE VOR-000040 , (7) VORTEX 850R PRINTHEAD VOR-000041 , (7) VORTEX 850R ASSY LIFTER MOTOR WITH COVER VOR-000054 , (12) VORTEX 850R ASSY SLED (MAINTENANCE MODULECOMPLETE) VOR-000055 , (14) VORTEX 850R CUTTER ASSEMBLY MODULE VOR-000056 , (45) VORTEX 850R GEAR CAM LIFT (PLASTIC LIFTERMOTOR GEAR) VOR-000057 , (60) VORTEX 850R ROCKER ARM LIFT LEFT VOR-000058 , (50) VORTEX 850R ROCKER ARM LIFT RIGHT VOR-000059 , (34) VORTEX 850R SENSOR SLED PCA VOR-000060 , (18) VORTEX 850R ASSY WIPER ROLLER (MICROFIBRE ROLLER) VOR-000080 , (9) VORTEX 850R ASSY MODULE WIPER TRANSFER (WITH MUDFLAP) VOR-000089 , (8) VORTEX 850R BUSHING SLED COMBINED VOR-000090 , (8) VORTEX 850R GEAR SHAFT SLED DRIVE VOR-000091 , (12) VORTEX 850R LEVER LATCH (PLASTIC PH COVER) VOR-000092 , (27) VORTEX 850R ROCKER ARM LIFT SPRING VOR-000093 , (10) VORTEX 850R DEDIPROG CABLE VOR-000094 , (1) VORTEX 850R ABSORBER WASTE INK VOR-000100 , (9) VORTEX 850R TTL CABLE VOR-000103 , (41) VORTEX 850R ASSY BUFFER AND VENT BOX VOR-000128 , (1) VORTEX 850R ASSY DOCK FLUIDIC PUMP SIDE VOR-000129 , (9) VORTEX 850R ASSY DOCK FLUIDIC VALVE SIDE VOR-000130 , (1) VORTEX 850R ASSY DPCA WITH HEAT SINK VOR-000131 , (1) VORTEX 850R ASSY DPCA WITH HOLDER VOR-000132 , (2) VORTEX 850R ASSY GRITSHAFT PRIMARY VOR-000134 , (5) VORTEX 850R ASSY LATCH PLASTIC CMKKY(SET OF CK+MK+Y) VOR-000135 , (3) VORTEX 850R ASSY MODULE PLATEN PRINT VOR-000139 , (2) VORTEX 850R ASSY MOTOR STEPPER SLED VOR-000141 , (1) VORTEX 850R ASSY PLATEN EXIT UPPER(STAR WHEEL ASSY) VOR-000142 , (5) VORTEX 850R ASSY PLATEN MAIN UPPER VOR-000143 , (5) VORTEX 850R ASSY WIPER MOTOR CONNECTOR PCA VOR-000147 , (6) VORTEX 850R CODE WHEEL MAIN MEDIA DRIVE VOR-000150 , (1) VORTEX 850R GEAR, COMPOUND 12TX34T VOR-000151 , (16) VORTEX 850R GEAR, COMPOUND 12TX48T VOR-000152 , (1) VORTEX 850R IDS REPLACEMENT KIT VOR-000153 , (5) VORTEX 850R LEVER LATCH SPRING (PH COVER) VOR-000154 , (15) VORTEX 850R PCA INK TANK INTERFACE VOR-000156 , (5) VORTEX 850R PCA INK TANK INTERFACE TEMP SENSOR VOR-000157 , (5) VORTEX 850R PCA INK TANK LEVEL VOR-000158 , (5) VORTEX 850R PCA K1 INK TANK INTERFACE VOR-000159 , (5) VORTEX 850R PCA PEN DRIVER VOR-000160 , (4) VORTEX 850R PULLEY DRIVE SHAFT MAIN VOR-000162 , (2) VORTEX 850R ROCKER ARM LIFT E-RING VOR-000163 , (10) VORTEX 850R SENSOR ENCODER PCA VOR-000164 , (6) VORTEX 850R SENSOR ENTRY PCA VOR-000165 , (7) VORTEX 850R SENSOR EXIT PCA VOR-000166 , (11) VORTEX 850R SENSOR LABEL WEB IRTX PCA VOR-000167 , (5) VORTEX 850R SPRING, ENCODER MODULE VOR-000168 , (21) VORTEX 850R WIPER MOTOR FLEX CABLE VOR-000169 , (1) VORTEX 850R DOUBLE USB CABLE FOR IXBDN MOTHERBOARD VOR-000181 , (1) VORTEX 850R DOUBLE USB CABLE FOR MX525DC MOTHERBOARD VOR-000192 , (1) VORTEX 850R SSD 32 GB FOR MX525DC MOTHERBOARD VOR-000204 , (2) VORTEX 850R SSD WITH IMAGE FILE FOR IXBDN MOTHERBOARD VOR-000330 , (1) VORTEX 851R BRACKET MOTOR SLED DRIVE VOR-000350 , (1) VORTEX 850S OVERLAY BADGE VOR-000358 (1) VORTEX 850R GEAR SHAFT SLED ASSEMBLY VOR-000361 , (34) VORTEX 850R POWER CORD FOR N. AMERICA VOR-000362 , (46) VORTEX 850R POWER CORD FOR EU VOR-000368 , (4) VORTEX 850R CODEWHEEL MAIN MEDIA DRIVEASSEMBLY VOR-000374 , (3) VORTEX 850R UNWINDER CIRCUIT BOARD VOR-000410 , (1) VORTEX 850R BASE RIP VOR-000416 , (9) VORTEX 850R BASE SERVER ENTRY LEVEL LINUX BASED VOR-000417 , (1) VORTEX 850R SSD WITH IMAGE FILE FOR FUJITSU MOTHERBOARD VOR-000420 , (1) VORTEX 850R FUSE, 0.125A 250V, TIME LAG, CARTRIDGE 5x20mm, GLASS 10/PKG VOR-000421 , (1) VORTEX 850R FUSE, 1.0A 250V, TIME LAG, CARTRIDGE 5x20mm, GLASS 10/PKG VOR-000422 , (1) VORTEX 850R FUSE, 3.15A 250V, TIME LAG, CARTRIDGE 5x20mm, GLASS 10/PKG VOR-000423 , (1) VORTEX 850R FUSE, 5.0A 250V, TIME LAG, CARTRIDGE 5x20mm, GLASS 10/PKG VOR-000424 , (1) VORTEX 850R FUSE, 6.3A 250V, TIME LAG, CARTRIDGE 5x20mm, GLASS 10/PKG VOR-000425 VOR-000425.. HIT# 2133474. Main Floor. Asset Located at 1409 Duff Drive, Fort Collins, CO 80524.
Name Reprographic Technologies
Auctioneer
Type Online-Only Auction
Date(s) 6/28/2016 - 6/30/2016
Location
Buyer Premium 18%-See #7 Sale Terms and Conditions
Description
SALES SPECIFIC TERMS SUMMARY: Registration: Bidders must register at www.hgpauction.com prior to bidding. All bidders must complete the registration form provided including name, company (if applicable), mailing address, and phone number. Bidders are also required to provide a valid email address. Credit card info is required at the time of registration. Visa, MasterCard, or American Express credit cards will be accepted for registration only. Credit cards will be charged a one-time fee of $1 in order to verify bidding registration. Invoices emailed: Invoices will be emailed to successful bidders within 24 hours of the close of the auction. Payment Instructions, including Wire Transfer information, will be included, as well as instructions for removal.
Terms and Conditions Heritage Global Partners Detailed Sale-Specific Terms & Conditions TERMS OF SALE Set forth below are the terms and conditions (the "Terms") that shall apply to any purchase by any party (a "Buyer") either directly from Heritage Global Partners, Inc. ("HGP") or in a transaction (a "Transaction") in which HGP serves as broker, agent, liquidator or auctioneer for any third party owner ("Consignor"). The Terms apply to all Transactions, including without limitation, public auctions conducted by HGP and direct purchases by Buyer of any item either before, after or independent of any public auction. By using or accessing any and all HGP Services and or Websites you agree you have read and understand the Terms and Conditions stated herein and are bound to these Terms and Conditions. You may not use or access any and all HGP Services if you do not agree to the Terms and Conditions stated herein. If you do not understand any or all the Terms and Conditions herein please contact HGP via email at cs@hgpauction.com for further assistance. TERMS AND CONDITIONS 1. No Warranty. All machinery, equipment, merchandise and other items (the "Goods") are sold on an "AS IS/WHERE IS" basis without licenses or other rights to software required for equipment to work, without any warranties or representations, either expressed or implied. Neither HGP nor the Consignor makes any warranties or representations of any kind or nature with respect to the property or its value and in no event shall either be responsible for correctness of description, genuineness, attribution, provenance, authenticity, authorship, completeness, condition of the property or estimate of its value. No statement (oral or written) in the catalog, at the auction, or elsewhere shall be deemed such a warranty or representation, or any assumption of responsibility. Prospective bidders are urged to contact HGP directly for detailed information regarding any item for sales. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY are expressly disclaimed. 2. Registration. Buyers must register prior to bidding at any auction sale and must be of legal capacity to enter into this agreement. All bidders must provide their name, company (if applicable), mailing address, phone number and email address prior to the auction. By registering, you represent and warrant any and all Buyer Information is accurate and complete. It is solely the Buyers responsibility to maintain current Buyer Information for completeness and accuracy. HGP reserves the right to deny and or terminate Registrations at any time at its sole discretion without notification. HGP reserves the right to deny usage and access of HGP Services and Websites at any time without notice or liability to any persons or third parties. When applicable, Electronic Bidders are required to provide a valid Visa or MasterCard number. At its discretion, HGP may charge a registration fee for Electronic bidding. This fee will be clearly displayed during the registration process. THE BIDDER AUTHORIZES HGP TO CHARGE LIQUIDATED DAMAGES TO THE CREDIT CARD LEFT ON FILE DURING THE REGISTRATION PROCESS. (See section 9 "Default" below.) 2A. HGP and its Website are for use by persons acting within their trade or businesses and may not be used by consumers. By registering, the Buyer represents, warrants and undertakes that it is or acts for a business and not for consumer transactions and has given correct information about its business and contact details as requested in HGP's registration procedure. 3. Deposits. HGP requires a deposit of not less than twenty five percent (25%) of the Buyer's total purchase price by the end of sale day - with the balance due by the end of the next business day. This can be in the form of cash, a cashier's check, or business check with a bank letter of guarantee. For Electronic Bidders, at its discretion, HGP may contact bidders via email or telephone before or during the sale to obtain a bank letter of guarantee or wire transfer as a deposit. If HGP does not receive a response from its attempts to contact Buyer or if the Buyer does not provide a deposit, HGP reserves the right to refuse or cancel Buyer's bids. 4. Invoices & Payment Instructions. For Onsite and Webcast auctions, winning bidders can request a printed paper invoice from the Accounting Manager at the sale location during or after the sale. Electronic Bidders will be sent an electronic invoice to the email address provided during registration. Detailed payment instructions for each sale are available in the printed lot catalog at the sale location on the day of the sale. Electronic Bidders will be sent detailed payment instructions via email along with their invoice. 5. Payments. HGP must receive the balance of the total purchase price no later than the close of business on the day following the auction (the "Final Payment Date"). All payments must be by federal wire transfer of immediately available funds. Credit cards are accepted (only) for Electronic bidding registration and for Liquidated Damages in the event of a default. No title shall pass to Buyer until the total purchase price and all Taxes have been paid to HGP in collected funds. 6. Taxes. Buyer must also pay to HGP on or before the Final Payment Date, all sales, export, use and other taxes due to any federal, state or local taxing authority (the "Taxes") as a result of Buyer's purchase, including without limitation, any taxes arising from any Buyer's Premium. To receive the benefit of any tax exemption, Buyer must supply HGP with a sales tax exemption certificate acceptable in form, scope and substance to HGP in HGP'S sole discretion. 7. Buyer's Premium. Auctioneer shall charge an 18% Buyer's Premium on all purchases. If the auction is conducted as a webcast sale (simultaneously conducted live on-site and streamed over the Internet for online participation), a different Buyer's Premium may be applicable and will be announced at the time of that specific sale. 8. Removal of Goods. (1) Buyers or their Agents must remove all Goods purchased before the final removal date and time announced by HGP at the auction (the "Removal Date"). (2) No Goods shall be removed until the full purchase price and all applicable taxes thereon have been received by HGP in the form required herein. ANY ITEMS NOT REMOVED ON OR BEFORE THE REMOVAL DATE SHALL BE DEEMED ABANDONED AND HGP SHALL HAVE NO FURTHER OBLIGATION TO BUYER WITH RESPECT TO SUCH ITEMS. Buyer shall be responsible for the safe and proper removal of any Goods purchased by Buyer. HGP does not pack, ship, store, crate or rig items for removal. Buyers may either pick up Goods at the designated auction site themselves or can contract with a third party agent to manage the removal process for them. Before Goods can be removed by an Agent, Agent must provide HGP with (1) proof of payment in full (Paid in Full Invoice) and (2) An "Agent Release Authorization" form which allows HGP to release items to a third party contractor for shipping, crating or packing purposes. Goods weighing more than 100 pounds must be removed by a qualified, insured rigger. Before any removal, Buyer must provide HGP with a certificate of insurance from the rigger, which certificate must be in form, scope and content acceptable to HGP in HGP'S sole discretion. Without limiting HGP'S discretion, such certificate must show that the rigger carries comprehensive liability insurance written by an insurance carrier of national standing and in an amount of not less than two million dollars ($2,000,000.00). Without limiting the generality of the foregoing, Buyer shall restore and repair all real and personal property that is altered or damaged as a result of Buyer's removal of the Goods. HGP shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines. Buyer is solely responsible to properly remove and store in appropriate containers all fluids, oils, hazardous chemicals, etc., from machinery purchased. Buyer does hereby indemnify HGP, the Consignor and the owner of the premises in which the Goods are located, from any and all claims, damages, and losses arising from Buyer's actions or actions with respect to the Goods and Buyer's presence on the premises in which the Goods are located, including without limitation, injuries to persons or property and environmental violations or contamination. Risk of loss on any Goods shall pass to the Buyer upon payment in full to HGP of all sums due from Buyer in respect to the Goods. HGP shall have no responsibility whatsoever for any missing or lost items that can be removed by hand if such items have not been removed within forty-eight (48) hours of the conclusion of the sale. There will be NO removal of any lots until the auction is complete. 9 Defaults. Bidders must bid only on those items they are prepared to pay for and remove in accordance with the terms and conditions of this sale. All items awarded to high bidders are contractually theirs and must be paid for by the Final Payment Date and removed by the Final Removal Date. IN THE EVENT PURCHASER FAILS TO PERFORM CONTRACTUAL OBLIGATIONS (PAYMENT AND REMOVAL) AS SPECIFIED IN THESE TERMS AND CONDITIONS, THE FOLLOWING ACTION APPLIES: PURCHASER WILL AUTOMATICALLY BE PLACED IN DEFAULT. THIS IS YOUR OFFICIAL NOTICE OF DEFAULT. Upon default, the purchaser shall lose all right, title, and interest which he/she might otherwise have acquired in and to such property as to which default has occurred. HGP will re-market and re-sell this property. Failure to pay invoices in full by the Final Payment Date in accordance with payment terms will subject Bidder to pay as Liquidated Damages a sum equal to the lesser of (1) 20 percent of the invoice price of the item(s) as to which the default has occurred, or (2) the full amount of the difference between the original invoice price and the re-sold price plus any expenses incurred to re-market or re-sell these items. IF HGP HAS NOT RECEIVED PAYMENT FOR WINNING BIDS WITHIN 24 HOURS OF THE FINAL PAYMENT DATE, THE BIDDER AUTHORIZES HGP TO CHARGE LIQUIDATED DAMAGES TO THE CREDIT CARD LEFT ON FILE DURING THE REGISTRATION PROCESS. Failure to remove items by the Final Removal Date in accordance with removal terms will subject Bidder to pay as Liquidated Damages the full amount of the expenses incurred to store or transport items until they are re-sold. IF BUYER HAS NOT REMOVED ITEMS WITHIN 24 HOURS OF THE FINAL REMOVAL DATE, THE BIDDER AUTHORIZES HGP TO CHARGE LIQUIDATED DAMAGES TO THE CREDIT CARD LEFT ON FILE DURING THE REGISTRATION PROCESS. 10. Adjustments. After Buyer has removed any item from HGP'S possession, HGP shall have no obligation to make any adjustment or accommodation to Buyer because of any mistake in quantity or other defect or problem with respect to such item. Buyer must make all requests for adjustments in writing to HGP before any item is removed from the premises where the auction is conducted. 11. Damages. HGP shall not be responsible for any damages, loss or theft of Goods except in the case of HGP's willful misconduct. Without limiting the foregoing, HGP shall not be responsible for damages or losses caused by strikes, civil disorders, or acts of God. 12. Changes. HGP reserves the right to withdraw or sell any assets contained in an auction prior to or proceeding the stated auction period without notification. HGP reserves the right to temporarily or permanently end an auction prior to or during the stated auction period at is sole discretion without notification. HGP, in its sole discretion, reserves the right to extend the stated auction period without notification. If for any reason HGP is unable to deliver any Goods purchased by Buyer, HGP'S sole liability shall be to return all sums paid by Buyer to HGP in respect of such Goods. 13. Minimum or Reserve Prices. HGP, in its sole discretion, reserves the right to establish a reserve or minimum price on any Goods without having to announce, post or publish notice to attendees and buyers at any auction. HGP reserves the right to confirm or reject the final bid. Further, HGP, and/or its affiliates or subsidiaries, may bid at the auction for its own account, on behalf of a third party or the seller. 14. Absentee/Proxy Bids. By completing an "Absentee (Proxy) Bidder Form," Bidders may appoint HGP to be an agent and proxy for the sole purpose of purchasing the items listed when the Bidder CANNOT bid on the day of the sale. ALL BIDS ARE FINAL AND BINDING and DO NOT include any applicable buyer's premiums and sales taxes. HGP will bid up to the specified maximum bid amount to win the item, using only the amount needed to win the item. HGP has complete discretion whether and when to accept Proxy bids. The auctioneer's announcements at the time the lot is sold take precedence on any and all published materials. Proxy bidders will be notified only if they have been declared the high bid. Notification will take place in the form of an electronic invoice which will be sent to the email address provided during registration. 15. Right to Refuse Bids of Deny Access. HGP, in its sole discretion, reserves the right to refuse the bid of any person without providing any notice or reason therefore. HGP reserves the right to deny the usage and access by any person or third party of any and all HGP Services and Websites without notification. 16. Bid Increments. HGP, in its sole discretion, shall control all bidding increments and advances at any auction. HGP reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that HGP believes was made illegally or in bad faith. In the event of a dispute among bidders, HGP may, in its sole discretion, either accept what it deems to be the final bid or solicit further bids on the item in dispute. No returns or refunds will be permitted, unless authorized by the Consignor in writing. 17. Aggregate Bids. HGP reserves the right, in its sole discretion, to sell items advertised as a public auction sale, on a piece by piece basis or as a complete lot. Without limiting the generality of the foregoing, HGP may accept a complete lot bid and then conduct an item by item auction which auction shall be effective only if the total proceeds there from exceed the amount of the complete bid. 18. Information Subject to Error. All information provided by HGP to Buyers, including without limitation, any advertising, lot sales catalogs or otherwise, is subject to deletions, errors, additions, and changes without notice. Although information is gathered from sources thought to be reliable, HGP shall have no responsibility whatsoever for any information provided to any attendee or buyers. All buyers shall rely solely on their own investigation and inspection of any Goods. 19. Right to Amend Terms and Conditions. HGP reserves the right to amend any and all of the Terms and Conditions stated herein at any time without notification at HGP's sole discretion. It is the Buyers responsibility to read and review the Terms and Conditions for each sale. HGP provides the Terms and Conditions through its Websites and in printed form at on-site auctions. 20. Agency Relationship. When HGP is selling or auctioning any Goods on behalf of a Consignor, HGP shall act as an agent only and shall have no liability whatsoever for the acts of any owner or principal. 21. Export Law Compliance. Buyers agree to comply with all United States export control and related laws, as well as acknowledge that HGP is not the exporter of any purchased item. Certain items offered for sale at an Auction or Sealed Bid Sale may constitute "Restricted Technology." Under Federal Law, such items may not be shipped outside the United States. Buyer also agrees not to export any item to countries which are subject to comprehensive embargoes or support terrorism. These countries include, but are not limited to: Cuba, Iran, North Korea, Sudan, and Syria. The list will change from time to time. HGP makes no representation or warranty concerning Restricted Technology or conducted an investigation to ascertain, which items, if any, constitute Restricted Technology. 22. Auction Sites. Buyers acknowledge that an auction site is a potentially dangerous place, Flammable, noxious, corrosive and pressurized substances may be present. Heavy equipment may be operated and electrical circuits may be live. Every person enters the auction site at his or her own risk with notice of the condition of the premises and the activities that will be or have been conducted on the premises. No person shall have any claim against HGP, the seller or their respective agents for any injuries sustained or for damages to or loss of property that may occur at the auction site. 23. HGP Rights and Remedies. If the Buyer fails to comply with any of the Terms, HGP shall have all rights and remedies available to it at law and in equity. Without limiting the generality of the foregoing, HGP may retain all deposits and partial payments received from Buyer and may resell any Goods that Buyer fails to purchase. Buyer shall be responsible for all costs, losses, and damages suffered by HGP (i) as a result of Buyer's breach of any of the Terms, including without limitation, lost profits and consequential damages and (ii) incurred in connection with the enforcement of HGPS' rights, including, without limitation, legal fees and costs and expenses related to the resale of Goods, including storage and rigging fees. 24. No Collusion. Buyers agree they will not participate in any bidding practices with the intent of manipulating the bidding. Any and all forms of collusion between Buyers is forbidden. Buyers agree they will not place bids using false names or Buyer Information. 25. Buyers Indemnification. Buyers agree they will defend, indemnify and hold harmless HGP, including its affiliates, directors, officers, employees, agents, shareholders, co-branders, or partners, from and against any and all claim, loss, damage, liabilities, judgments, fees and expenses incurred by HGP, including its affiliates, directors, officers, employees, agents, shareholders, co-branders, or partners, through the use of HGP Services and Websites 26. Website Usage. The following is specific to the access and usage of HGP Websites including and not limited to any and all features and applications: A) Each Registrant will specify a unique User Name and Password and it is solely the responsibility of the Registrant to maintain the confidentiality of this User Name and Password. B) Registrants are solely responsible for any and all transactions or transmissions using their User Name and Password C) HGP is not responsible for any and all unauthorized or compromised usage of the Registrant's User Name and Password. Registrants are responsible for contacting HGP in writing for any and all unauthorized usage of their User Name and Password. D) Registrants agree they will not: i) Disrupt, interfere or create outages to computer networks that directly or indirectly affect HGP Websites. ii) Falsely misrepresent or impersonate any other person or entity. Registrants are forbidden from misrepresenting a Registrant's employment by or affiliation with any third party. iii) Registrants are forbidden from posting, uploading, transmitting, publishing or distributing any and all information that contains viruses, code, files or programs with the malicious intent of affecting HGP Websites. iv) Registrants agree they will not copy, modify, reproduce, distribute or sell any information or material provided through HGP Websites. E) HGP is not responsible for any and all products, content, information or material provided by links to or statements regarding third party services. This includes but not limited to riggers, shippers, partners and any third party services listed. F) Registrants agree HGP and its affiliates, including partners, officers, directors, employees, agents, shareholders or co-branders, are not responsible for any and all damages, actual or alleged, resulting from the downloading of any information or materials from HGP Websites.
Your bid must adhere to the bid increment schedule.
Bid Amount Bid Increment
0.00 - 30.00 5.00 USD
30.01 - 150.00 10.00 USD
150.01 - 500.00 25.00 USD
500.01 - 2,000.00 50.00 USD
2,000.01 - 5,000.00 100.00 USD
5,000.01 - 10,000.00 250.00 USD
10,000.01 - 40,000.00 500.00 USD
40,000.01 - 75,000.00 1,000.00 USD
75,000.01 - 100,000.00 2,500.00 USD
100,000.01 - 250,000.00 5,000.00 USD
250,000.01 - 9,999,999.00 10,000.00 USD
9,999,999.01 - 9,999,999.99 10,000.00 USD
Currency USD
Buyer Premium 18%-See #7 Sale Terms and Conditions
Payment Terms
By Wire Transfer Only
Removal Schedule: July 6 thru July 13 Suggested Logistics Companies: Move It Contact: Operations/Jeff Nielsen Phone: (800) 831.0030 Fax: (800) 535.6155 For a free estimate, please email your invoice to Email: hgpauction@moveit.com Navis Pack & Ship Keith Binzer 5641 E 56th Ave. Commerce City, CO Tel: (303) 455-8080 Fax: (303) 853-4682 E-mail: co1028@goNavis.com XL 3 Rigging Contact: Brett Leveque Phone: (303) 681.5715 Email: brett@xl3rigging.com
Notice: Financing terms available may vary depending on applicant and/or guarantor credit profile(s) and additional approval conditions. Assets aged 10-15 years or more may require increased finance charges. Financing approval may require pledge of collateral as security. Applicant credit profile including FICO is used for credit review. Commercial financing provided or arranged by Express Tech-Financing, LLC pursuant to California Finance Lender License #60DBO54873. Consumer financing arranged by Express Tech-Financing, LLC pursuant to California Finance Lender License #60DBO54873 and state licenses listed at the this link. Consumer financing not available for consumers residing in Alaska, Louisiana, Nevada, Ohio, Vermont, Hawaii, or Wisconsin. Additional state restrictions may apply. Equal opportunity lender.